At present, more and more aerial work platforms are recognized and widely used in China. While working at heights brings convenience to our work, we have to face some potential safety hazards. For example, in the construction site, the scissor lift platform should focus on preventing its overturning, scraping, electric shock, etc. If there is a need for a special person to manage the power consumption in the construction, it should be led from the designated power point to the construction power distribution cabinet according to the notice of the engineering department. In addition, unauthorized connection is not allowed. All electric tools shall be equipped with leakage protector, and electric equipment shall be provided with zero connection protection and repeated grounding. In the daily use process, we should also focus on the inspection before use, monitoring in use, maintenance after use, etc. in the use process, we should focus on the following points:

1. The operators of scissor type aerial work platform must participate in the training of fall protection and use of lift truck before starting to operate the equipment.
2. The body of scissor type aerial work platform should be labeled with the following contents: the lifting speed limit, rated load capacity, maximum lifting height, manufacturer’s name and production date, etc.
3. The installed elevator shall be checked and accepted by the on-site safety engineer before use, and can be put into use after hanging the permit card.
4. The lift truck user must check the lift and fill in the checklist before using it every day.
5. Users of scissor type aerial work platform shall operate and use it in accordance with the operation regulations of the lift truck.
6. The working area of scissor type aerial work platform must be on the open and flat ground, and it is not allowed to run on the uneven ground.
7. The platform legs must be fully opened and firmly supported.
8. When the platform is in the rising position, the operator cannot leave.
9. Personnel using scissor type aerial work platform must wear full body safety belt.During the lifting process, the safety belt shall be attached to the platform, basket or the fastening point manufactured by the manufacturer. When the scissor type aerial work platform is lifted to the working height, the safety belt shall not be tied to the platform, but shall be tied to the reliable hanging point of other structures. If there is no reliable hanging point, the steel wire rope shall be used to hang on the steel beam or concrete beam, and the safety belt shall be hung on the steel rope ring.
10.  During operation, it is forbidden to arbitrarily move the inlet and outlet throttle of oil cooler. If it is necessary to switch, it should be carried out under the supervision of the team leader in strict accordance with the procedure order and the operation order. The change of lubricating oil pressure should be closely monitored during the operation.If the oil pressure fluctuates, stop the operation immediately.
11. The oil level of oil tank shall be kept normal and the pressure difference of oil filter screen shall be cleaned in time.After overhaul, filter screen should be installed on the oil inlet pipe of each bearing for oil circulation.
12. 1Warning signs shall be set up for full-time maintenance personnel.

The post Code for safe use of scissor type aerial work platform appeared first on MORN LIFT.

With the development of social science and technology nowadays, aluminum alloy elevators are used more and more widely. Whether it is construction, civil engineering, or people’s daily life, hydraulic elevators are inseparable. Many businesses have seized this business opportunity to invest in factories and elevators. The company then stands like bamboo shoots in major industrial cities, but the lifting machinery industry is still very hot and in short supply. It can be seen from the side that the society is developing rapidly, driving the development of the entire industry and people’s needs. How buyers choose a good lifting machinery among the company’s products has become an important topic today.

One: When buying lifting machinery, you can’t buy it blindly. It is necessary to do sufficient market research and field inspection to determine the company’s scale and its credibility. This is first and foremost. Now many small-scale companies in the market cut corners in order to seek violence, thereby greatly reducing the quality of lifting products. Although they will sell very cheaply, this kind of machinery does not take long and has a risk factor. Big. Therefore, as a purchaser, you cannot covet a little bit of price and cause greater regret.

Two: Based on the information you have investigated, choose a lifting machine with a better price/performance ratio. You must choose from its technical parameters, practicability and versatility. Usually, there are many types of aluminum alloy lifting machines, including (vehicle lifts, fixed Lifts, hydraulic lifting platforms, scissor lifts, etc.) each has slightly different technical parameters and uses, but there are also many similarities in functions. Therefore, as a customer, you must purchase with a purpose, that is, you What do you want to buy a lifting machine, and which type of lifting machine can meet your needs and has many uses.

Three: The last point is that after the equipment arrives, when opening the box for acceptance, check whether the random technical data is complete, whether the random accessories, tools, and accessories are consistent with the list, whether the equipment and accessories are damaged, defective, etc., and do the unpacking acceptance recording.

Application 

Articulated aerial work platform vehicles are widely used in installation, maintenance and climbing operations in municipalities, electricity, street lights, advertising, communications, photography, gardens, transportation, docks, airports and ports, large industrial and mining enterprises and other industries.

The curved arm aerial work platform is a replacement product of the folding arm lift. It can be widely used in stations, docks, airports, hotels, post and telecommunications, municipal gardens, grain depots, cleaning companies, public building facades, decoration, decoration or power system installation and maintenance, etc. The lift has the advantages of light weight, self-propelled, electric start, self-supporting legs, simple operation, large working surface, 360-degree free rotation, and especially the ability to cross obstacles for high-altitude operations. It is suitable for outdoor operation and uses diesel engine as power. It is also possible to use batteries as the walking and working power of the machine as required.

Who is us?

MORN Group Limited, founded in 2002, is located in the Jinan city of the Shandong Province in China. It is one of the largest machinery manufacturers in China. MORN has devoted itself to the research, development, design, manufacture, sales, and service of CNC machines, hydraulic equipment, and parking systems.

Our company is a member of the China Association of Warehouses and Storage. With excellent facilities, advanced techniques, tremendous technology, and full-scale after-sales services, all of our products have passed the inspection of the Check Station of China Special Equipment and Manufacture License of Special Equipment of the People’s Republic of China. Our company has the 2000 Quality System Certification of ISO 9001, and passed the test of CE Quality Community.

The post How to choose an aerial work platform appeared first on MORN LIFT.

Then how do they make success in the aerial rental market? And why do they choose MORN LIFT to be their partner?

Quality-oriented Leasing Strategy

“As we expected, our new MORN LIFT boom lifts are good examples of the high-performance, high-quality equipment that increased the value of our rental fleet,” says David. “We hope to provide our clients with high value-added products at fair prices. The important thing is to deliver high-quality, high-performance lift equipment so that our clients can complete their work more safely and efficiently. ”

Customer Satisfaction Weighs More Than Making Money

“It is of pretty important to find the optimum rental solution for each client application through the good advice of our experienced and trained team. In many cases, our clients have their own options that they want to rent, but we will figure out if this aerial lift is right for the intended job. Rather than just considering whether to rent the most expensive lift equipment, we provide a faster or more economical solution according to clients’ needs, this will pay off in terms of customer satisfaction. For us, customer loyalty counts more than turnover”, says David.

Like the recent case of a large customer, who initially wanted to rent a MORN LIFT articulating boom lift. But when their staff explained the advantages of the MORN LIFT telescopic boom lift with greater load capacity and outreach, their customer recognized that the performance of the latter is more in line with their work needs.

“After the lift equipment was rented out, the customer is very satisfied with the equipment we recommend, and the machine runs smoothly on the construction site. For us, customer satisfaction is what really counts and what has earned us a good reputation,” adds David.

Customer Loyalty Comes from Reliable Service and Support

“It’s great to know that we can count on MORN LIFT, as good partner with regard to sales, warranty and service. They’re very professional and responsive and provide us excellent support. This is the key to our close relationship with customers in different industries.” Explains Sommer.

A Promotion Rental Strategy

As a one-stop aerial lifts rental company, sales, service and training of aerial work equipment are not the only way to their success. They have a professional marketing team, they use social media and Internet platforms to communicate news, such as the introduction of new MORN LIFT equipment and their specific benefits and advantages.

This not only allows customers to know more about their company, but the characteristics and operating points of the MORN LIFT equipment have also attracted extensive attention from customers.

“ 60% of our clients come to us via word of mouth. 40% of our potential new customers approach us via our company website and social media.”

What to Consider When Entering the Aerial Lift Rental Market?

Whether you’re a start-up or an established rental company, if you are thinking of entering the aerial lift rental market, there are more things to make decisions about than just what lift equipment to order. Delivery vehicles and training are two important factors you should consider when buying aerial work platforms.

Small lift equipment, such as material lifts, electric scissors lifts, single-person mast lifts, and towable boom lift, is compact and lightweight enough to be transported by standard pickup trucks. Clients can easily take these models at the beginning of the lease and return them at the end of the contract.

However, large aerial work units will need to be transported by trailer, which requires more than just pickup trucks with hooks. At this point, your company needs to decide whether to buy pickup trucks and trailers, or whether to buy more specialized transportation tools, such as box trucks or semi-trucks with flatbed trailers.

It is better to start with small lift equipment, which will not only minimize the capital investment you need to make in the air fleet, but also your delivery vehicles. This will help you start to enter the aerial lift rental market and give you the opportunity to grow and expand your business over time.

it’s also important to utilize the manufacturer’s training programs to train your team to operate, sell, or maintain your aerial rental fleet to its full potential. MORN LIFT, for example, offers an online-based aerial work platform training program designed by the people who know the equipment best.

Train everyone on your staff, from service technicians to outside and inside sales. The more your staff knows about the equipment they are renting, the better rental partners your company will be to your customers.

The post How to Become a Successful Aerial Work Platform Rental Company? appeared first on MORN LIFT.

The height of the aerial work platform is one of the most important indicators, it determines your access points. The seller of the aerial work platform will indicate two heights in the aerial work platform parameters: platform height and working height.

1. Platform height: refers to the lifting height of the platform, that is, the height of the plane on which the operator steps.
2. Working height: refers to the height of the working surface that the operator’s hand can touch when standing on an aerial work platform. It is generally assumed that the average height of a human being, plus the height that can be reached by extending the arm upwards(generally calculated as 2 meters).

In addition, due to the use requirements of the boom lift, its design height will be much higher than the scissor aerial work platform. The boom aerial work platform sold by MORN LIFT can reach a maximum of 35 meters. At present, the working height that the scissor aerial work platform can reach is 16 meters.

Load options

Apart from lifting the operator, how many tools and construction materials need to be carried?

The original intention of the aerial work platform design is not to be used as a lifting device, but to safely and smoothly lift the operator to the working height. The load-bearing standards of all platforms are designed according to the concept of “supporting at least 2-3 people”. The load-bearing of commonly used scissor-type aerial work platforms and boom-type aerial work platforms are generally set according to 230kg.

Scissor-type aerial work platforms usually have a small extension platform. At present, the industry adopts the method of manual pull-out. Its carrying capacity is much smaller. It is designed according to the weight of an operator, usually at 120kg.

Within the load range of the platform, tools and auxiliary materials can be carried out. Exceeding the load range will cause protective shutdown of the equipment. In severe cases, it may cause accidents.

In addition, the guardrail of the aerial work platform is to protect the safety of personnel. Do not use it to hold materials and tools to avoid danger.

Scissor type or boom type or mast type?

The aerial work platform can be simply divided into 3 types: scissor lifts, boom lifts and mast lifts. The scissor type is suitable for vertical lifting occasions, and the boom type is suitable for occasions with certain extension requirements, that is, the working environment with a slightly larger horizontal distance between the equipment position and the working surface. According to MORN LIFT, the following factors should be considered:

Horizontal distance between equipment parking position and working surface:

At the front of the operating platform, there is a platform that can be extended slightly, so the working range can be extended to a certain extent.

If the plane you need to work is a wall, and there is a green belt under the wall with a width of one meter, which can not be rolled and loaded, then the scissor lift platform can be operated. If your work on this wall requires frequent movement, the scissor lift can only extend a short distance forward and cannot move sideways, making it a bit difficult to work.

Size of the working surface

The design of the boom lift is to solve the above problems. It can cover the working surface in a large range and at a large angle when the equipment itself is basically stationary. Painting a wall may be completed without a mobile device.

Do you need to reach over a certain height?

If there is an obstacle with a certain height in the middle of the parking position of the lift equipment and the working surface, the telescopic boom lift may be blocked by the obstacle. If you need to deal with this situation, you need to choose articulated boom lift, literally understood, is that the boom of this platform can be bent and can be adapted to a more complex working environment than the straight boom type aerial work platform.

Electric-type or diesel-type?

Without special requirements, electric drives become the first choice due to environmental protection and energy-saving.

When the size and weight of the lifting equipment are large, the problem of insufficient battery life and insufficient power will be caused by the use of the electric drive. At this time, the design of the diesel engine is adopted.

In addition, the electrically driven aerial work platform needs to be continuously charged for about 10 hours. Certain work cannot guarantee timely charging, and a fuel-driven aerial work platform can also be used.

Other conditions at the worksite

Is it a very flat cement floor?

Are you concerned about the exhaust and noise of fuel engines?

Are there narrow entrances?

Is it in a harsh working environment?

And whether auxiliary equipment such as forklift is needed to transport the aerial work platform to the designated location, etc.

For example, the trailer lift can cope with the more complex site space structure, and the body is light and narrow, suitable for indoor installation of large commercial complexes.

However, like a large shipyard, the working environment is relatively harsh and sandblasting and other operations will seriously erode the engines of high-altitude vehicles. In this case, you can consider choosing the high-altitude vehicle equipment provided by MORN LIFT, because the professional team maintains the equipment more systematically and strictly than ordinary users, ensuring that the high-altitude equipment maintains a healthy and strong heart.

The post Selecting The Right Type of Aerial Lifts appeared first on MORN LIFT.

Aerial work platforms, or AWPs, are not specific to one particular industry or job. For instance, manufacturing companies use aerial lifts to reach overhead components, as well as to reach behind large pieces of equipment. General contractors use lifts to reach high areas when making repairs, and construction companies identify aerial lifts as one of the most critical pieces of equipment in their fleet. Rescue crews use aerial lifts to reach buildings, and contractors use them for indoor and outdoor applications. In essence, aerial lifts provide reliable access for a range of industries and purposes.

Plants, venues and construction sites

Application characteristics: There is a lot of aerial work in building construction, and traditional aerial work equipment such as scaffolding, derrick, gantry, etc. have poor safety, a large amount of construction materials, and long time consumption. The aerial work platform has become an ideal substitute for scaffolding by virtue of excellent safety guarantee and excellent work efficiency. It promotes the mechanization of construction and greatly reduces the labor intensity of aerial work during construction.

Equipment installation in complex environments

Application characteristics: Under some special construction conditions, the aerial work platform is the best choice to meet the construction requirements. If a high-altitude operation platform is used to install the glass curtain wall, it not only shortens the construction period, but also eliminates the safety hazards existing in the traditional high-altitude operation method.

In addition, due to the matching use of various types of aerial work platforms and the modification of some platforms, the installation problem of curtain walls that are not easily accessible is solved.

Pipeline installation

Application characteristics: There are a lot of indoor high-altitude operations in the installation of fire-fighting pipelines, and there are many operation points and complex operation spaces. The requirements for flexibility greatly exceed traditional operation methods. The high-altitude operation platform realizes variable work stations and height adjustment, and at the same time can carry materials and construction equipment to the operation point, which greatly reduces the construction difficulty and improves the safety and efficiency of installation operations.

Decoration, cleaning and maintenance of building walls

Application characteristics: The decoration, cleaning and maintenance of the external wall surface of the building require temporary high-altitude reachability, similar to the installation of outdoor billboards, the layout of large exhibition halls or stadiums, infrastructure maintenance, station and subway Indoor maintenance, etc.

In these applications, large-scale fixed scaffolding is completely inappropriate in terms of cost and time. On the other hand, although the commonly used gondola equipment can meet the usage requirements in some cases, its safety and mobility are much inferior to aerial work platforms, especially for the large operating range and wide operating area.

Equipment without mobility will greatly reduce work efficiency, while the self-propelled aerial work platform can move to achieve multiple operations while maintaining an elevated state.

The convenience and efficiency improvement it brings is unmatched by other equipment

Manufacturing and maintenance of large equipment

Application characteristics: Large equipment such as ships and aircrafts require flexible operating heights and positions during manufacturing, installation, and maintenance. The aerial work platform is naturally the first choice for these occasions. Especially in shipbuilding and repair plants, not only the outstanding air reach capability is required, but also often heavier tool equipment and operators are required to arrive at the working position together, so choosing a suitable self-propelled aerial work platform has become an improvement in engineering efficiency Important means.

Among the aerial work platforms used in these places, the demand for self-propelled telescopic and articulated aerial work platforms is dominated. This type of product not only has good load-carrying capacity but also can be extended through a telescopic and articulated arm structure. It can cross a certain obstacle and achieve the effect of one point of lifting and multi-point operation, which greatly facilitates large equipment such as ships manufacturing and maintenance work.

Supermarket and warehouse logistics

Application characteristics: With the development of modern large supermarkets, warehouses, and logistics centers, the multi-layer stacking and storage of goods are increasingly inseparable from the use of self-propelled aerial work platforms. Although the traditional forklift can also complete certain auxiliary work, it has great deficiencies in terms of safety and ease of use, especially when it requires staff to reach a high place to complete the corresponding operation of the cargo, the aerial work platform is even more necessary.

Among them, mast and gantry self-propelled aerial work platforms are the most widely used. They have the advantages of small size, lightweight, smooth lifting, safe and reliable, and so on. It can complete the high-level lifting operation in a small space. With the ability to move in the elevated state, and through the intelligent control system, all operations can be completed independently by one person, which greatly improves the efficiency of warehousing and logistics work and reduces the labor intensity.

In addition to these typical applications, aerial work platforms are also widely used in ports, docks, airports, power, communications, gardens, and other departments.

Moreover, in recent years, the construction scope of engineering construction has become larger and larger, the working conditions have become more and more complicated, and the demand for customized products has become stronger and stronger. Therefore, the aerial work platform will have a wider development space.

MORN LIFT is a high-end manufacturing enterprise specializing in the R & D, manufacturing, sales, and service of various intelligent aerial work platforms. The company adheres to independent innovation, concentrates on technology research and development, and ingeniously manufactures six series of more than 80 specifications of a full range of products, providing customers in more than 80 countries and regions around the world with safe and efficient aerial work full life cycle solutions, achieving professional, intelligent, serialized and branded development.

The post Applications of Aerial Lifts appeared first on MORN LIFT.

Now our morn group is using the enamel paint, which is more steady, high temperature resistance and glossy than the normal paint. Making the hydraulic lifts long life and more beautiful.

Please see the photo for comparison.

We have to use better paints for extending the lift life, keeping customer using this lift for long time.

That is a little part of what we make for our customers.

Welcome to visit us for hydraulic lifts, scissor lifts, boom lifts ect.

The post Better painting of hydraulic lifts appeared first on MORN LIFT.

With the 30 years develop and progress, Jiyang country now has more than 200 different hydraulic lift manufactures, of which Morn takes the leading position. And Jiyang lift were sold to all over the country and more than 80 countries. More and more foreign partners are looking for cooperation with us.

The leading products of Jiyang are hydraulic mobile scissor lifts, stationary scissor lifts, cargo lifts, container lifts, aluminum lifts and in recent years, we are heading to more advanced products such as self propelled scissor lift, and aerial boom lifts, also made great progress in this fields.

The future of Jiyang hydraulic work platform and the Morn Group will be better and bright.

The post Jiyang- The Home of Chinese Hydraulic Work Platforms appeared first on MORN LIFT.

Then what performance and achievements did we obtain from this exhibition? Let us share you some details.

1. Exhibited Products were all Sold Out During Exhibition.

The four exhibited lift platforms were shipped to Dubai in advance and installed and tested on the spot. Thanks to our local installation team who worked with our staff finishing the installation and testing work proficiently and professionally, the preparatory work was smooth and in order. What made us pride was that the lifted platforms attracted much attention from visitors. Many of them personally operated the lift and experienced the safe and stable lifting/lowering process, which convinced them to order the lift on the site and build cooperation relationship with MORN LIFT. The four exhibited lift platforms were all sold out smoothly, and we also received a bundle of order contracts and prepaid deposits from customers.

2. Local GNTV Interviewed MORN Exhibitors.

MORN exhibitors were honored to be interviewed by GNTV staff who talked about MORN brand, MORN products category, global business and customer service with our staff. This interview strengthened our confidence that MORN products and service would be spread to wider corners of the world. Facing a promising development prospect, all MORN members will spend more effort than ever before to manufacture high quality lift products and offer considerate service to global users.

3. Visit Local Customer and Inspect Lift Condition.

After the exhibition, our staff visited Dubai local regular customers who have been cooperated with MORN for many years. Our lift engineers and technical sales inspected the condition and operation of our goods lift installed in local warehouses. They gave on-site operation training and maintenance instructions. Hopefully, the lifts worked well in daily goods handling work due to its creditable quality and work performance, as well as the proper maintenance of the owner. Most of them came to our booth to experience our featured products and discuss deeper cooperation with us.

4. A Batch of Orders are Now Produced in Our Standard Production Lines.

Our factory is now busy with designing and manufacturing goods lifts, aluminum mast lifts and scissor lifts ordered by customers from the Big 5 Heavy Exhibition. Standard production lines operated by our skilled workers have a high productivity and quality standard. If you are rightly planning to choose a cargo lift or man lift for your business, welcome to contact us and visit our factory. If you place orders now, machines production will be added to the scale production with strict quality control and on time delivery.

No matter you are regular customers or new customers, at MORN we always provide you with cost-effective lifting solutions with fair prices, professional customer service and bespoke products. Just contact us today to find the best suitable fit for your business.

The post MORN LIFT Got Great Achievements from the Big 5 Heavy 2018 appeared first on MORN LIFT.

Enjoy your favorite lift platform:

As there are many regular customers and agents in Dubai, our exhibited products attracted more attention from them. The high speed goods lift powered by gear reducer, single mast lift, double masts lift, and steering mobile scissor lift were installed well on the spot before the opening of the exhibition. Visitors were excited to try to operate the lifts with the instructions of our staff. The high-grade quality, reliable stability, safety designs as well as the warm service of our workers all convinced the visitors to progress future cooperation with MORN. Also the exhibited lift platforms were ordered on the spot by local customers with fair prices.

Support from overseas customers:

There was no doubt that this exhibition created a great opportunity for MORN to walk into overseas markets and work with more cooperators. We came to Dubai and shook hands with world customers from thousands of miles away. What made us more comforted was that our regular and loyal customers of Middle East came from Bahrain, Qatar, Saudi Arabia and Dubai local areas to support our exhibition and discuss business cooperation with us. They were real users and operators of MORN lift platforms, from goods lifts to man lifts, and they gave thumbs-up to MORN products.

Invitations to overseas agents:

Standing at the 10^th anniversary of development, MORN has set up the conception of seeking development driven by brand promotion. All of our products and services are the identification of MORN brand. Hence product quality, customer experience and customer service are the continuous goals that all MORN member are dedicated to achieving. On the way of brand internationalization and overseas market expansion, we honestly invite more partners to be our agents who are interested in machinery technology innovation or hope to upgrade their business to a new leaf. Based on reciprocity and mutual benefits, we are looking forward to building deep cooperation with you on lift manufacturing and application industries.

In a word, thanks for all local customers and business partners from Dubai and credible supporters coming from neighboring countries. More information about our products and custom service, please visit our website or leave your message below.

The post Successful Event of MORN LIFT in the Big 5 Heavy Exhibition appeared first on MORN LIFT.

You can feel and check 4 our featured lift platforms in our booth:

This exhibition will surely benefit the visitors who want safe and quality lift platforms for both goods and workers. Come and visit us. You will:

• Get a 10% discount if you order any one of the above 4 lifts in our booth.
• Get a 5% discount for any one order in 2018 by showing the photo you took with our staff.
• Get a free U disk which includes our company profile, product category and details, factory production, customer feedback, etc. Only top 30 visitors are eligible.
• Meet our regular customers from construction industry to know more about our product quality and reliability.

We will be pleased to see your presence in the booth OS H43. Thank you.

The post Meet MORN LIFT at the Big 5 Heavy Exhibition in Dubai appeared first on MORN LIFT.